TPB® Worktops can have 6 possible bases: Polyethylene, compact, methacrylate, birch phenolic board, aluminium or steel.

The top part of a TPB® Worktop is made of a large mineral porcelain-ceramic sheet, with more than 100 different possible finishes, for example: wood appearances, stones, single colours, engraved, textured, etc. They have the advantage of being the most resistant top on the market today.

Tops are extremely light – they are half the weight or less of synthetic stone worktops, but they maintain their mechanical strength.

Their weight goes from 13 to 30 kg/m2:

  • Their light weight does not affect the resistance of low modules.
  • They can be moved easily without risks when being assembled.
  • They enable variations on the same site, with no problems.

 

TPB® Worktops are extremely light – they are half the weight or less of synthetic stone worktops, but they maintain their mechanical strength.

TPB® Worktops can be 5 mm (3 mm + 2 mm) to 45 mm thick. This allows us to install the longest worktops without joints.

Porcelain-ceramic panels can be installed on walls and doors as additional accessories on the worktop, so the vertical panels have the same look and finish as the horizontal top.

The two or three layer edges obtained through the different bases (like white or black polyethylene) combined with the 3 mm porcelain surfaces, enhance and give them a very attractive look.